How to Reset Bose Soundlink the first step is to make sure that the speaker is properly plugged into the power source. If it’s not, it’s necessary to disconnect it and restart it to restore its settings. How to Reset Bose Soundlink if you can’t, you can try to reboot your device by pressing the AUX and Volume Down buttons together for 10 seconds. If that doesn’t work, try pressing and holding the Power button. This will turn the speaker on again.
If you’ve tried resetting your speaker, but it doesn’t work, you may need to reinstall the software. The easiest way to do this is to connect your speaker to a Bluetooth device and then power it on. To do this, you need to hold the power button for about ten seconds. Then, wait for the LED indicators to flash and press and hold the power button again. After the device is connected, you can use the speaker again.
How to Reset Bose Soundlink if the Bluetooth device is connected to a Bluetooth device, the device may need to be reset. To do this, you must power off the speaker for about 10 seconds. Once the speaker is powered off, press and hold the power button for at least ten seconds. Once the power button is released, the LED indicators will flash again. The LED lights will turn green. Once they’re back on, the Bluetooth device will be reset.
If the speaker is not connecting to the phone, the Bluetooth connection is unstable, or the sound isn’t playing properly, you can reset the Soundlink speaker by pressing and holding the AUX and Volume Down buttons together for about 10 seconds. After this, the Bluetooth device will begin to flash again, and the LED indicator will come back on. Then, you can restart the speaker. It will take about a minute to return to normal settings.
Once the speaker is powered up again, you must power off the speaker and then turn it back on. To do this, hold the Bluetooth button for a few seconds. The speaker will be reset and the Bluetooth device list will appear. The LED light will flash and the speakers will now be connected to each other. Attempting to pair the speakers will clear the device’s Bluetooth settings. Afterwards, the Bluetooth connection will be active again.
The next step is to try to reconnect the speaker to the Bluetooth device. Then, the speaker will be paired. If it doesn’t, try to restart it again by re-pair. If the speaker is connected to your phone, it will show the pairing process again. To reconnect the speaker, power it down for a few minutes. After this, the Bluetooth device will start again. Once the Bluetooth device is reconnected, it should flash the LED lights to indicate that it’s working correctly.